2048 MB kit (2×1024MB) dual channel pack

2048 MB kit (2×1024MB) dual channel pack

Mushkin XP4000 2GB

Mushkin Redline XP4000 2GB

From the Manufacturer:

Package : 2048 MB kit (2×1024MB) dual channel pack

IC Spec : Infineon HYB25D512800CE-6

CAS Latency : 3-3-2-8 (PC4000)

Test Voltage : 2.6~2.9 V

PCB Board : 6 Layers PCB B6U808 rev 1.1 (Brainpower)

Speed : DDR 500 MHz (PC4000)

Type : 184-pin DDR SDRAM

Error Checking : Non-ECC

Registered/Unbuffered : Unbuffered

Package type: TSOP

Quality Control : Every module is hand tested on DFI nForce4 motherboards beyond their rated spec with the RST Pro2 test cards (known as being the best in the industry)

Warranty : Lifetime

Are you ready for 2 GB?

Do you want to play the latest and greatest games without lag? How about using Photoshop without problems? Do you use memory intensive applications like video editing? Or do you need total system boost and the security of not having to upgrade? Or do you need 4 GB of ram? If so then you are a perfect candidate! The 2 gig alternative is great for everyone because we all have to admit 1 GB has become standard. For new games and to run at the highest settings we need to have free resources and many applications won’t run smoothly without tons of free resources. The 2 GB kit is also a great choice for overclockers, because two sticks of memory are much easier on the memory controller than four sticks. However, if you are an overclocker and can live with only 1 GB, 2 x 512 MB will usually overclock better than 2 x 1024 MB.

Packaging

Each module has a sticker on it, which gives the rated speed.

The heatspreaders are red and seem to be made from aluminum. The heatspreaders used are Mushkin’s brand new innovation.

They feature a new thermal tape that is more of a thermal conductor than an adhesive. When I opened the heatspreaders, the tape was not dry at all. Also it performs very well and touches about 4/5 of the memory ICs.

These sticks use a specially coated black PCB that is no other than Brainpower paired up with Infineon high yield CE-6.

The black PCB has been stamped with the Mushkin name as well as their website.

You can find more detail on Mushkin.com

Overclocks well, without any extra voltage

Great heatspreaders that do not pickup fingerprints

When i first pulled this RAM out of the Box I was very surprised. First off its was called Redline, which most of us know as the CH-5 bearing 1 GB kit. Second it had the brand new heatspreaders I had heard so much about. Never the less I was totally surprised by its performance on i865, it beat my BH-5 in bandwidth and timings at 265 MHz and my TCCD in timings at 275 MHz. As you can probably tell, I really love this memory at 265 MHz, and there is a good reason for that. It is a combination of tight timings and great bandwidth and it is rock stable at 2.8V, plus it is a 2GB kit which no one expected to turn out so good with DDR333 rated CE-6 chips. Apparently the CE-6 chips were made at a very high yield and perform above par. This memory is definitely a keeper, and holds its own against other 2GB kits.

Please if you have any questions, ask prior to attempt to buy.

Terms and Conditions

Payment accepted only from confirmed address. If you do not have a confirmed address please email me before bidding. I will then check your ratings before I accept you payment.

I WILL NOT ACCEPT PAYMENT OR BIDDING FROM AFFRICA OR FROM SOMEONE HERE IN UK WANTING TO SEND THIS  AS GIFT TO A RELATIVE ON A RELIGIOUS TRIP TO AFRICA.

I WILL NOT POST IN A HURRY AS MANY ATTEMPT TO BUY AND ASK TO SHIP STRAIT AWAY AND WILL NOT ACCEPT EXTRA MONEY TO SHIP OVERSEAS AS WELL IN A HURRY.

“I am sorry if I may have offended anyone but due to latest avents I have to specify this on my listings.”

2048 MB kit (2x1024MB) dual channel pack10.0101